Before getting down to the business of cleaning a commercial space, especially the floors, it’s important to pre-inspect the area. It’s important to make sure there are no chips in the tiles installed and there are no loose ends at the corners especially. If there are any plug points very close to the floor (these can be usually found in commercial buildings), what will be your approach?
All these questions need to be tackled as you take on a professional floor cleaning gig. We are taking and answering some frequently asked questions about floor cleaning that might help professional carpet cleaners like yourself better your cleaning approach as a professional.
Q. Are chemicals bad for floor tiles? And do I absolutely need to use those?
Using a chemical agent (floor tile cleaner) to wipe off the grime and grout from between those tiles can ease your job as a professional floor cleaner to a great extent. However, make sure to:
Dilute – Do not pour a harsh chemical directly on any tiled floor ever. Even if it’s written on the packaging of the cleaning agent you’re using, make sure to mix it with water to run down its potency. This will save you a lot of trouble in future.
Use warm water – When using chemicals, try using warm (not hot) to mix the solution before you put it into your floor cleaning machine. These are a few tricks that will keep you on the edge from the rest of the other carpet cleaning professionals.
Q. What’s important in professional cleaning – Technique or Machine?
Both, the method that you’re using as well as the equipment you put down on your client’s floor, are important to get the best outcome and to maintain your clientele. Suppose your client’s concern is grout and you are using mere scrubbing of the floor, you might not be able to get all the extra cementing out. And if your client wants just a nice polishing but your appliance isn’t providing it, your gig is going to fall flat on its face. Therefore, invest in a good floor tile cleaner that comes with a polisher either attached.
Q. Is floor scrubbing and floor polishing the same?
No. The answer to this is a big fat no. Apart from the names, everything around these two techniques is staringly different. Floor scrubbing is far more invasive and extensive as it involves actual scrubbing of the floor which is integral to removing tough stains and hidden dirt, it gives the finished look to your client’s floor when the scrubbing is followed by polishing.
Both are floor cleaning treatments but while the former comes first and is the most important in getting that clean floor, the latter is more of a cosmetic feature. That being said, polishing the floor also extends the life of the service you just provided your client and lessens the after-service period, which is favourable to your client and to you too in the long run.
Conclusion
If tough stains and grout make your life difficult as a professional cleaner, consider these three points:
- Is my technique right?
- Am I using suitable chemicals?
- Is my machine up-to-date?
For the first one, you need time, research and good man-power, for the next two, there’s always a quick solution. Find out here some of the best grout cleaners as well as the floor scrubbing machines.
Get your answer to all of these questions, collectively, positive and you will see your job getting better and your clientele swelling up more than before.
Leave a Reply