Safety, Cleaning, And Plumbing Tips For Getting Your Home Back After Water Damage
Post last updated on 4-20-18
You wake up the next morning and see the accumulation of water in a specific place of your home. What exactly happened? Have the pipes burst? Or is it the cause of a malfunctioned sump pump? Check out the best water damage restoration company in Los Angeles!
Though you may be astonished to see the water flooding through the walls, ceilings, or the floors, what makes sense is to perform the required action. Whatever the cause of water damage is, you should know how to take things under control.
Curious to know how to get your home back after water damage?
The following tips will help you out!
Undeniably, this is the first and foremost step to take as a homeowner. If the entire house is flooded with water, plan for immediate evacuation. But if a single portion of the house is affected by water damage, you should carry out the following tasks:
- Electricity and water can mix – getting in contact with this combination is extremely dangerous. To avoid this situation, turn off the main power. But if this requires you to cross the water, do not do it yourself. Instead, call your electrician immediately.
- Wear rubber gloves and rubber boots till the electrician comes in.
- If the area rugs and wooden furniture are wet, remove them immediately. To avoid stains, you can get these washed once you’re done with water damage restoration.
Dry The House As Much As You Can
Even if you’ve turned off the main power switch, you can still dry out your house without the need for an electrical appliance (such as a wet vacuum cleaner).
To do this manually, use old towels to soak all water up. After this, squeeze the towel so you can easily transfer the soaked water into the bucket. As you do this repeatedly, you’ll notice the water is being removed. Though this is a slow water-drying process, it’s safe. Once you’ve transferred all water into the bucket, empty the bucket by throwing off the water into your lawn.
Now that a lot of water has been removed from the house, you’ll notice that the floors are slightly wet. To ensure the area is fully dry, consider these points:
- Mop the floors with a dry cloth.
- Open all windows of the house so the air flow enables drying out the floors faster.
- While wearing protective clothing, switch on the fans.
Disinfect Your House
By drying out the house all on your own, you’ve done a good job! But don’t assume that your walls and floors are clean now. The mildew, spores, and mold begin to develop from each corner of the house (including furniture and even home décor items) without even giving you a warning. This is when you need to call professional Benchmark Cleaning Services.
Whether you have vinyl floors or stone floors, getting your house cleaned by experts will give you the assurance that your house is safe from the bacteria caused by water damage.
Get The Plumbing Disaster Fixed
If your house was affected by water damage due to a leaky roof, it’s time to call Plumbing Fix for the repair of your ceiling. Same goes with the burst pipes. But if the reason is not known, you’ll still need the assistance of a plumbing service.
Once the professionals diagnose the cause of water damage, they can easily repair the fixtures that caused trouble.
Get The Wall Coverings Replaced
Drywall is just like a sponge. At times of water damage, it absorbs the excess water. Even if it looks dried up, it actually isn’t. If the internal wetness isn’t removed from a drywall, there are chances that it will break or fall apart. Therefore, you should discard it immediately and contact drywall repair and installation services in Washington, D.C. or the area you live in and ask them to replace it.
If you have wall coverings such as laminated paneling, you should remove and dispose of because they prevent the walls from drying out completely. In case of any doubt, it’s ideal to contact your landlord and ask them if the wall coverings need to be replaced.